PAS

Classification

Technical Specification

Copper Tube: 3/8″

Geometry: 32 mm x 28 mm

Fin Spacing: 4 mm – 6 mm

Capacities are calculated according to EBM or Ziehl-Abegg
or equivalent brand fans.

STANDARD UNIT COOLERS FEATURES

COIL

  • Ø3/8”. Ø1/2 and ø5/8” copper tubes
  • “V” type aluminum fins.
  • The finned coils are designed with aluminum fins spaced at 4, 6, 8, 10 or 12 mm, crimped onto copper tubes.
  • Header inlet and outlet tube connections made of copper.
  • Staggered copper tubes.
  • The coil circuits are designed for refrigerants R404A, R507C, R134A, R449A, R407F, R410A.
  • Different fins spacing can be selected as an option for 4mm to 12mm.
  • Refrigerant distributor.

CASING

  • Electrostatic power coated RAL 9016, 9002, 9003 galvanized steel.
  • Stainless steel and aluminum casing as optional.
  • Side panels are removable.
  • Hinged/ Folding drain tray is standard for all models.
  • Side panels are removable.

FAN

  • Selection of a unit cooler with various fan number/diameter combinations offering the dimensional and air throw characteristics best adopted to the size of the cold room.
  • Selections should be confirmed by your Arctic Technical Specialist.
  • Different kinds of motor available as optional. (EC or AC)
  • Motor protection IP54 insulation class F of alternate as per requirement.
  • Different kinds of accessories available as optional. (Fans, Ring, Heater, etc.)
  • Working conditions -40 0C / +55 0C.

DEFROSTING

  • B1 type defrost system suitable for 0 0C / + 5 0C cold room applications.
  • Defrost heaters are applied on heat exchange coil.
  • B2 type defrost system suitable for -34 0C / 0 0C frozen room applications.
  • Drain line heaters, fan housing heaters, hot gas defrost system and water defrost system are optional.
  • This facility enables homogenous heat distribution for fast and efficient defrosting.
  • Options of Water Defrost, Light Electric Defrost, Electric Defrost (coil + drain pan), Hot Gas (coil + drain pan) available as per the requirement.

CAPACITY

  • The nominal capacities calculated according to Eurovent EN328 standards that refer to SC1-SC2-SC3-SC4 conditions are valid for R404A.

OPTIONS

  • Different casing color.
  • Other tube wall thickness and fin spacing on request.
  • Mono phase 220V 1 ~ 50Hz fan or three phase 400V 3 ~ 50Hz fan.
  • Please keep in touch with our sales department about your specific needs that are not mentioned in the catalogue.
GET YOUR FREE CONSULTATION

What new technology does is create new opportunities to do a job that customers want done.